|
Surface Preparation:
Coating performance is, in general, proportional to the degree of surface preparation.
Prior to coating, surface must be clean, dry, undamaged and free of all contaminants, including salt deposits.
Areas to be primed - round off all rough welds and sharp edges
Spot prime sanded surface with a generous amount of Amercoat 185H.
Allow to dry according to drying times provided.
Apply a second coat if the film is not consistent.
(185H is the corrosion barrier and care should be given to a consistent film thickness.
|
Apply one or two coats of PSX1001 Topcoat over the Amercoat 185H following the recoat times provided.
PSX1001 is the final color coat and should be applied for a consistent color (no visible 185H)
Allow to dry before putting into service.
| 1001 Drying time (ASTM D1640) | °F/°C |
| | 120/49 | 90/32 | 70/21 | 50/10 |
| touch, (min) | 1/2 | 1 | 2 | 3 |
| through, (hrs) | 3 | 8 | 12 | 24 |
|
| recoat, minimum (hrs) | 1/2 | 2 | 4 | 12 |
| recoat, maximum (hrs ) | None |
Any question please call 1-800-535-9277
Kits consist of 1 qt. 185H primer, 1 qt. PSX1001 topcoat. 2 mix sticks, 1 rag, rubber gloves, sand paper and 2 paint brushes. MSDS and Product data sheets.
Shipped 4 kits per case
|
