Garelick Marine Products

Table Pedestals for Back Decks, Salons and Pontoons
	White Polymer Table with Stowable Pedestal Provides salon areas and pontoon deck with removable dinette table (Includes two recessed cup holders. 3" (8cm) Dia.) Complete table 28" x 15" (71 x 38cm) with pedestal 7" (19cm) diameter cast aluminum base on each end Anodized finish to resist saltwater corrosion SPECIFICATIONS : 30" (76cm) Height, Fluted Anodized Tube, 2.25" (5.75cm) Diameter 99193 : 2.25" (6cm) storage mounting brackets Mount to side coaming or transom for storing table pedestals High density black delrin
		75349	Deluxe Table Pedestal with Top	$159.95
	Stowable Cockpit Table System Provides pontoon deck and salon areas w/ removable dinette table Anodized finish to resist saltwater corrosion SPECIFICATIONS : Table Top:   18" x 30" oval acrylic coated ABS white table top. Stanchion Tube and Bracket:   Fluted 2.25" (6cm) diameter anodized tube 25" (64cm) height. Anodized wall bracket 5" H x 4.75" W x 2.56" D (15 x 12 x 6.5 cm)
		75400	Cockpit Coaming Mount with Oval Top Side Mount Installation - Complete table with coaming wall bracket. 18" x 30" (46cm x 76cm) oval acrylic top	$199.95
		75401	Table Bracket Only 5" H x 4.75" W x 2.56" D (15 x 12 x 6.5 cm)	$33.95
		75405	Cockpit Deck Mount with Oval Top Complete table with flush mount deck bracket. 18" x 30" (46cm x 76cm) oval acrylic top	$204.95
		75375	Flush Mount 6" Sq. Socket 6" (15cm) square mount for 2.25" (6cm) diameter tube for use with #75405	$36.95
	Side Mount Table Leg System Allows installation of table system to any vertical surface (coaming) Consists of mounting bracket, angled table leg and oval acrylic-coated ABS plastic table top with two recessed cup holders Table leg removes from side mount bracket and table top removes from table leg for stowing when not in use Spring loaded locking pin holds table leg in place SPECIFICATIONS : Table Top:   18" x 30" oval acrylic coated ABS white table top. Stanchion Tube and Bracket:   Fluted 2.25" (6cm) diameter anodized tube 25" (64cm) height. Anodized wall bracket 5" H x 4.75" W x 2.56" D (15 x 12 x 6.5 cm)
		75337	Side Mount Table, Stainless Steel with Oval Top Stainless Steel table leg is 2.25" diameter stainless steel with 18" x 30" oval, acrylic coated ABS table top. When mounted table leg extends out 16.5" from vertical surface. Table leg height is 19.25" . Installed height of table will be 16", plus distance from deck to mounting bracket location plus thickness of table top.	$212.95
		75359	Side Mount Table, Aluminum with Oval Top Anodized aluminum table leg with 18" x 30" oval acrylic coated ABS table top.	$177.95
		75402	Side Mount Table Bracket Mounting bracket is polished 304 stainless steel. Mounting holes are spaced 4" W x 3" T. Overall outside dimensions of mounting bracket are 5" W x 4" T, 1/4" thick.	$43.95
		75648	Table Adapter Socket Marine grade polymer table adapter socket, 7.25" diameter	$19.95
	Quick Release Table Pedestal System Patented, revolutionary table hardware system Quick release levers allows effortless take-down of table system for storage Simple to use, simple to install. Low-Profile deck ring creates minimal interference when table is stowed No large center hole in deck as is common with other table hardware systems Marine grade polymer components resist corrosion 2 ¼" ribbed Anodized aluminum stanchion is tapered at both ends 9 ¼" and 13" stanchion posts ava ilable for converting dinette into bunk use Individual components available if additional mounting locations are desired
		75640	Complete system includes: deck ring, socket base, table mounting socket, 25.5" stanchion tube	$89.99
		75641	Deck Ring Cover, Tan	$6.95
		75642	Deck Ring Cover, Black	$6.95
		75643	13" Stanchion post, 2.25" diameter	$19.95
		75644	9.25" Stanchion post, 2.25" diameter	$17.95
		75645	Surface mount socket base w/ deck ring, 6.625" diameter	$35.95
		75646	Surface Mount Deck Ring, 6.25" diameter	$12.95
		75647	Ribbed Taper Stanch. Post Only, 25 1/2in	$25.95
		75648	Table Adapter Socket	$19.95
	Complete systems with tops
		75650	Quick Release Table System 15" x 28" (38 x 71cm) rectangular white polymer table top and two recessed cup holders	$189.95
		75320	Deluxe Oval Stowable Table System 18"x30" (46cm x 76cm) oval, acrylic-coated ABS plastic table top with two recessed cup holders	$203.95
		75321	Rectangular Stowable Table System 16"x32" (41cm x 81cm) rectangular, ABS plastic table top with four recessed cup holders	$129.95
	"Build your own" 2.875" table hardware system Tapered socket design for wobble free solid support Table top support bracket- rotates 360° and locks Fixed height or gas rise adjustable height options Fluted profile 2 7/8" (7cm) diameter stanchion tube Anodized finish to resist saltwater corrosion
		75442	Table Top Mounting Bracket	$139.95
		75445	Tapered Gas Rise Stanch	$146.95
		75446	28in Stanchion 2 7/8in Diameter	$55.95
		99023	Spider Swivel Casting	$36.95
		75355	Flush Mt. Taper Socket Base (order below)	$50.95
		75356	Surface Mt. Taper Socket Base (order below)	$50.95
	Table pedestals for smaller boats Provides salon areas and pontoon decks with removable dinette tables Engineered for marine use 3 piece, all-aluminum provides solid table base Fluted profile stanchion with protective anodized finish Quick stowage **Flush mount bases require drilling into deck and extend 2.75" below deck
		75340	Flush Mount Base with Fluted Anodized Tube, complete 3-piece set	$119.95
		75341	Surface Mount Base with Fluted Anodized Tube, complete 3-piece set	$119.95
		75343	13" Fluted Taper Stanchion Post for Conversion to "Bunk" Height (Flush Mount) 2¼" dia.	$20.95
		75344	9¼" Fluted Taper Stanchion Post for Conversion to "Bunk" Height (Surface Mount) 2¼" dia.	$14.95
		75345	Flush Mount Taper Socket Base	$34.95
		75346	Surface Mount Taper Socket Base	$34.95
		75347	Fluted Taper Stanchion Post only (Flush Mount) 30"	$21.95
		75348	Fluted Taper Stanchion Post ONLY (Surface Mount) 28¾"	$31.95
	Table pedestals for smaller boats Provides salon areas and pontoon decks with removable dinette tables Engineered for marine use 3 piece, all-aluminum provides solid table base Fluted profile stanchion with protective anodized finish Quick stowage **Flush mount bases require drilling into deck and extend 2.75" below deck
		75350	Flush Mount Base with Fluted Anodized Tube, complete 3-piece set	$159.95
		75351	Surface Mount Base with Fluted Anodized Tube, complete 3-piece set	$149.95
		75373	13" Fluted Taper Stanchion Post for Conversion to "Bunk" Height (Flush Mount) 2 7/8in dia.	$30.95
		75374	9 1/4"Fluted Taper Stanchion Post for Conversion to "Bunk" Height (Surface Mount),2 7/8in dia.	$21.95
		75355	Flush Mount taper Socket Base Only	$50.95
		75356	Surface Mount taper Socket Base Only	$50.95
		75357	Fluted Taper Stanchion Post ONLY (Flush Mount) 30"	$50.95
		75358	Fluted Taper Stanchion Post ONLY (Surface Mount) 28 3/4"	$50.95
Adjustable Table Pedestals
	Adjustable Table Base Gas Rise or Manual Converts dinettes to berths 9"(23cm) diameter cast aluminum base on each end for support Locks any height from 14.5" to 29.5" (37- 75cm) 2.875" (7cm) smooth stanchion tube In lower position inside tube goes below deck 6" (15cm)
		75025	Adjustable Table Pedestal Manual rise with smooth polished finish. 14.5" to 30.75" (37cm - 78cm). Protrudes 6" (15cm) below deck	$139.95
		75225	Adj.Table Pedestal Anodized Manual rise with smooth polished finish. 14.5" to 30.75" (37cm - 78cm). Protrudes 6" (15cm) below deck	$164.95
		75325	Adj. Table Pedestal Anodized Ribbed Manual rise with ribbed stanchion. 14.5" to 30.75" (37cm - 78cm). Protrudes 6" (15cm) below deck	$184.95
		75425	Adj.Table Ped. Gas Rise (Ribbed) Sealed gas-powered rise with ribbed stanchion. 14.5" to 29.5" (37cm - 75cm). Protrudes 8.5" (22cm) below deck (63 lb. gas spring)	$329.95
	Mid-Range Gas Rise Table System Provides adjustable height in salon/cabin areas 3 ½" outside diameter anodized bright polish tubing 2 7/8" inside diameter anodized bright polish tubing Gas Spring for lift Cam lock collar locks height adjustment in place Can be mounted directly to deck for permanent mount or to an anodized aluminum plate for portable use Table top mount is a permanent anodized aluminum plate Special Order Item, call or E-mail for availability
		75392	Gas Rise Table System 12½" - 26" Height Adjustment: 12 ½ - 26", 63# gas spring, Anodized aluminum permanent top plate, 11" x 15", 9 ¼" round base plate mounted directly to deck, Cam lock collar locks height adjustment in place. Tube protrudes 11 ½" below deck.	$559.95
		75394	Gas Rise Table System 14 ½" - 28 ½" Height adjustment: 14 ½ - 28 ½, 43# gas spring, Anodized aluminum permanent top plate, 11" x 15", 9 ¼" round base attached to stanchion for mounting to deck, Cam lock collar locks height adjustment in place. Tube protrudes 9 ½" below deck.	$479.95
	Gas Rise Yacht Table Base Provides adjustable height in salon/cabin areas Ultra smooth gas powered operation adjustable 20"- 29" (51-74cm) Self-standing 19" (48cm) square base, 3/8"thick with 9" x 13" (23 x 33cm) table top support, 1/4" thick Polished and Anodized finish to resist saltwater corrosion Special Order Item, call or E-mail for availability
		75460	Gas Rise Table Base - 18½"- 27½" 3/8" thick anodized aluminum plate with 3½" stanchion tube, twist lock T-Handle; 40# gas spring	$879.95
	Two Stage Gas Rise Yacht Table Pedestal Adjustable Height 4.0 Commander Series Robust design provides adjustable height in salon/cabin and back deck areas. Lift - adjust height - lock with polished stainless handles Smooth gas powered operation adjustable full range 15" - 30" (38 - 76cm) Polished and anodized finish resist saltwater corrosion Special Order Item, call or E-mail for availability
		75470	2 Stage Gas Rise Yacht Table Base Range of travel 15" - 30" (38 - 76cm), 12" diameter base casting with 4", 3.5" & 2.875" diameter stanchion tubes, Top plate surface 9" x 13" (23 x 33cm)	$589.95
	Twin tower table base Provides adjustable height in salon/cabin areas Ultra-smooth gas powered operation, table height adjusts from 18" to 26½" Single knob, remote actuation system adjusts both pedestals in unison 3 ½" diameter anodized bright polish tubing Self-standing with 2-D shaped anodized aluminum base plates, 7" x 20" Special Order Item, call or E-mail for availability
		75451	Twin Tower Table Base Anodized aluminum top plate is 12" x 37" x ¼", designed to fit table size of 41" x 24"; Two 28# gas springs	$1,899.96
	Electric Adjustable Table Base System Provides electrically operated adjustable table system for salon and cabin areas 3.5" (9 cm) outside diameter anodized bright polish stanchion tube with 2 7/8" diameter inside tubing. 10.5" (27 cm) diameter base casting for extra stability Linear actuator included Special Order Item, call or E-mail for availability
		78500	Electric Table Base, 12½" - 27½" Range of travel is 12½" to 27½" (32-70 cm). System protrudes 17" (44 cm) below deck. Table mounting plate is detachable and can be locked down to prevent rotation	$1,129.95
		78501	Electric Table Base, 15 3/8" - 30 3/8in Range of travel is 15.38" to 30.38" (39-78 cm). System protrudes 10" (26 cm) below deck. Table mounting plate is attached permanently to column	$1,159.95

Please Note: With all the recent cases of on-line credit card and Identity theft, we feel obliged to inform our customers that neither C.G. Edwards Co Inc. or Boxell's Chandlery, under any circumstance sell or divulge any personal information about our customers, nor do we in any way store confidential information on our server. Please be assured that we will continue to do everything within our power to keep any information submitted by our customers as secure as we possibly can.

Please select the products and/or enter the number of units required. On JavaScript-enabled browsers the display table will be automatically updated. Such display is for information only and is not essential for the operation. You can select any number of items prior to adding to the shopping cart. It is not necessary to add each item to the cart as they are selected. However, if the products are in the form of a simple or dropdown list, and JavaScript is NOT enabled, then you must add each item to the cart individually.