C.G.Edwards & Co.Inc.

272 Dorchester Ave, P.O.Box 358
Boston, MA 02127
Phone: (617)268-4111-4112 * Fax:617-268-8845
Email: websales@cgedwards.com




Marine & Industrial Hardware

Thimbles and Wire Rope Clips

Wire Rope Clips

G429 Fist Clips

(Click on picture at left for full technical specifications)
G29 Fist Clip, Click for Tech Data Qty. Size Price
Features
3/16-1/4 $ 6.75
  • Bolts are an integral part of the saddle. nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation.
     
  • All sizes have forged steel saddles
     
  • Entire clip is galvanized to resist corrosive and rusting action.
     
  • All clips are individually bagged or tagged with proper application instructions and warning information
     
  • Assembled with standard heavy hex nuts
     
Fist Clip wire clips meet or exceed the performance requirements of Federal Specification FF-C-450 Type III, Class1, Except for those provisions required of the contractor.
5/16 $ 7.20
3/8 $ 7.58
7/16-1/2 $ 9.44
9/16-5/8 $ 13.27
3/4 $ 18.22
7/8 $ 25.15
1 $ 27.92
1-1/8 $ 40.01
1-1/4 $ 42.61
1-3/8-1-1/2 $ 72.04




G450 Forged Wire Rope Clip

(Click on picture at left for full technical specifications)
G450 wire rope clip, Click for Tech Data Qty. Size Price
Features
1/8 In $ 2.14
  • Each base has a Product Identification Code,(PIC) for material traceability, the name Crosby or "CG" and a size forged into it
     
  • Sizes 1/8" through 3" have forged bases
     
  • Entire Clip - Hot dip galvanized to resist corrosive and rusting action.
     
  • Only Genuine Crosby Clips have a red U-Bolt for instant identification
     
  • All Clips are individually bagged or tagged with proper application instructions and warning information
     
  • Clip Sizes up through 1-1/2" have rolled threads
     

Crosby Clip, all sizes 1/4 and larger meet the performance requirements of Federal Specification FF-C-450 Type I, Class1, Except for those provisions required of the contractor.
3/16 In $ 2.27
1/4 In $ 3.16
5/16 In $ 3.33
3/8 In $ 3.49
7/16 In $ 5.45
1/2 In $ 5.58
9/16 In $ 6.89
5/8 In $ 7.11
3/4 In $ 9.20
7/8 In $ 13.18
1 In $ 15.22
1-1/8 In $ 16.98
1-1/4 In $ 24.46
1-3/8 In $ 32.13
1-1/2 In $ 32.94
1-5/8 In $ 60.05
1-3/4 In $ 78.84
2 In $ 87.70
2-1/4 In $ 128.95
2-1/2 In $ 145.80
2-3/4 In $ 233.28
3 In $ 289.44
3-1/2 In $ 478.44




SS450 Stainless Steel Wire Rope Clip

(Click on picture at left for full technical specifications)

SS450 wire rope clip, Click for Tech Data Qty. Size Price Features
1/8 in $ 14.82
  • Each base has a Product Identification Code,(PIC) for material traceability, the name Crosby or "CG" and a size forged into it
     
  • Available in sizes 1/8" through 5/8"
     
  • Entire clip is made from 316 stainless steel to resist corosive and Rusting action
     
  • All components are Electro - Polished
     
  • All Clips are individually bagged or tagged with proper application instructions and warning information
3/16 in $ 16.62
1/4 in $ 19.33
3/8 in $ 27.81
1/2 in $ 39.95
5/8 in $ 63.50




Wire Rope Thimbles
G411 Standard Wire Rope Thimbles

(Click on picture at left for full technical specifications)

G411 thimble, Click for Tech Data Qty. Size Price Features
1/8 in $ 0.65
  • The Standard Choice for light duty applications and loading conditions
     
  • Hot dipped Galvanized steel
     

G411, meets the performance requirements of Federal Specification FF-T-276b Type II, Except for those provisions required of the contractor.
3/16 in $ 0.65
1/4 in $ 0.65
5/16 in $ 0.84
3/8 in $ 0.84
1/2 in $ 0.94
5/8 in $ 2.35
3/4 in $ 2.79
7/8 in $ 4.34
1 in $ 4.97
1-1/8-1-1/4 $ 13.11




 
G414 Extra Heavy Wire Rope Thimbles

(Click on picture at left for full technical specifications)

G414 Extra Heavy thimble, Click for Tech Data Qty. Size Price Features
1/4 in $ 0.67
  • Greater protection against wear and deformation of wire rope eye
     
  • Longer Service Life
     
  • Hot Dip Galvanived
     
G414 Meets the performance requirements of Federal Specification FF-T-276b Type III, Except for those provisions required of the contractor
5/16 in $ 1.11
3/8 in $ 1.59
7/16 in $ 2.84
1/2 in $ 2.88
5/8 in $ 3.29
3/4 in $ 6.80
7/8 in $ 7.80
1 in $ 14.55
1-1/8-1-1/4 $ 21.60
1-1/4-1-3/8 $ 41.26
1-3/8-1-1/2 $ 58.86
1-5/8 in $ 109.08
1-3/4 in $ 127.33
1-7/8-2 in $ 174.96
2-1/4 in $ 247.32




 
SS414 Extra Heavy Stainless Steel
Wire Rope Thimbles

(Click on picture at left for full technical specifications)

S414 Extra Heavy thimble, Click for Tech Data Qty. Size Price Features
1/4 in $ 2.84
  • Greater protection against wear and deformation of wire rope eye
     
  • Longer Service Life
     
  • Type 304 Stainless Steel
     
5/16 in $ 3.26
3/8 in $ 5.64
1/2 in $ 8.86
5/8 in $ 12.93
3/4 in $ 61.24




 
G408 Open Pattern Wire Rope Thimbles

(Click on picture at left for full technical specifications)

G408.jpg - 3186 Bytes Qty. Size Price Features
1/4 in $ 0.62
  • reccommended for light duty applications in which it is being assembled into another fitting
     
  • Hot dipped galvanized steel
     
5/16 in $ 0.68
3/8 in $ 0.68
1/2 in $ 0.78
5/8 in $ 2.07




 
S-412 Solid Wire Rope Thimbles

(Click on picture at left for full technical specifications)

S412.jpg - 3501 Bytes Qty. Size Price Features
1/2 in $ 10.84
  • fits pin for open wire rope socket, boom pendant clevis and wedge socket
     
5/8 in $ 21.24
3/4 in $ 21.24
7/8 in $ 40.50
1 in $ 40.50
1-1/8 in $ 51.03
1-1/4 1-3/8 $ 53.57




Please Note:
Due to recent developments, we feel obliged to inform our customers that neither
C.G. Edwards Co Inc. or Boxell's Chandlery,
under any circumstance sell or divulge any personal information about our customers, nor do we in any way store confidential information on our server.
Please be assured that we will continue to do everything within our power to keep any information submitted by our customers as secure as we possibly can.

Please select the products and/or enter the number of units required. On JavaScript-enabled browsers the display table will be automatically updated. Such display is for information only and is not essential for the operation. You can select any number of items prior to adding to the shopping cart. It is not necessary to add each item to the cart as they are selected. However, if the products are in the form of a simple or dropdown list, and JavaScript is NOT enabled, then you must add each item to the cart individually.
Current Selection
The following information is generated automatically for display only. Tax and delivery may be changed.
Total value ($) Choose Tax rate(%) Choose Delivery method Sub total ($)

If you would like to check the status of an order,
Click here

Contact C.G. Edwards
Contact C.G. Edwards


Return to Crosby Index

Logoc-trans.gif - 27631 Bytes
Return to C.G. Edwards Homepage


This page updated October 29, 2004

All Images and logo's on this website are copyrighted and may not be reproduced without permission

Raptah.gif - 3801 Bytes