C.G.Edwards & Co.Inc.

272 Dorchester Ave, P.O.Box 358
Boston, MA 02127
Phone: (617)268-4111-4112 * Fax:617-268-8845
E-mail: websales@cgedwards.com

 

garlogo.gif - 13579 Bytes

Garelick Marine Products

Outboard Motor Brackets

71095.gif - 23068 Bytes
Hydra-Powered Motor Brackets

Designed for 4-stroke motors

Effortless operation, Raises and lowers auxiliary motors
in less than 20 seconds.
Aircraft stainless steel hardware and engineered bronze bushings at pivot points for increased ease of operation and durability

  • Wide stance provides stability
  • 12v self contailed marinized hydraulic actuator
  • Heavy duty 1/2" 6061T6 structural aluminum
  • Triple coat protective finish (anodized, E-coat, Powder Coated)
  • Includes:
    operating control switch and wiring harness
    Stanless steel mounting hardware
    2000 lb tensile strength motor safety cable

Specifications:
Model H.P. Rating Maximum Motor Weight Vertical Travel
71095 Up to 25 148 lbs. 13-1/4"
71096 25 to 40 248 lbs 13-1/4"
 
The above brackets are shipped Factory Direct
Please allow 3-6 weeks for delivery
 
Qty Model Description Price
71095 Hydra Powered Bracket to 25 HP $2,199.95
71096 Hydra Powered Bracket to 25-40 HP $2,299.95



71092.gif - 11905 Bytes
Manual Operated Hydraulic Lift Outboard Motor Bracket

Designed for 4-stroke motors

Effortless operation, Raises and lowers auxiliary motors
in less than 20 seconds.
Aircraft stainless steel hardware and engineered bronze bushings at pivot points for increased ease of operation and durability

  • Raise and lower trolling and auxiliary motors on power boats and sailboats with ease
  • New generation motor bracket lifts up 4 stroke motors with short side to side movement of a lever handle (removable for stowage).
  • Release valve lowers the bracket down into operating position
  • 14" of continuous vertical height adjustment provides optimum trim adjustment for any water surface or boat load condition
  • Eliminates the inconveniences of conventional spring loaded models; no electrical wiring required
  • High Tensile Alloy - Black Satin Anodized aluminum body to resist corrosion
  • Aircraft stainless steel hardware and engineered bronze bushings at pivot points for increased ease of operation and durability
    2000 lb tensile strength motor safety cable

Specifications:
Model H.P. Rating Maximum Motor Weight Vertical Travel
71092 7-1/2 to 25 175 lbs 14"
 
The above bracket is shipped Factory Direct
Please allow 3-6 weeks for delivery
 
Qty Model Description Price
71092 Hydraulic Lift Manual Pump Outboard Motor Bracket $1,549.95



71090.gif - 8692 Bytes
4-Stroke Motor Brackets

Easier to operate and lift with a 5 vertical position lock bar, 2 positive safety locks secure bracket in up position, Heavy-duty stainless steel torsion spring to help counter-balance the motor's weight.
Black satin anodized aluminum body resists corrosion

  • Raise and lower trolling and auxilliary motors with ease
  • Built specially for new 4-stroke, heavier, hi-torque motors
  • 11-1/2"x 10-3/4" x 2" thick, black poly mounting board
    on model 71090
  • 10-3/4"x 12" x 2" thick, black poly mounting board
    on model 71091
  • Accomodates long or short shaft motors
  • Motor safety cable included for added protection
  • Aircraft type stainless steel hardware with nylon friction washers

Specifications:
Model H.P. Rating Maximum Motor Weight Vertical Travel
71090 7-1/2 to 30 169 lbs. 9-1/2"
71091 7-1/2 to 25 175 lbs 15 1/2"
 
Qty Model Description Price
71090 Ourboard Motor Bracket-Offshore $309.95
71091 Ourboard Motor Bracket-Offshore- to 25 HP $459.95



71033.gif - 8611 Bytes
Stainless Steel Motor Brackets
  • Easier to lift and lower - Stainless Springs help counterbalance motor weight
  • Transom mount locks and holds motor up or swings down for propulsion
  • Built in transom angle adjustment for optimum motor perfomance
  • Extra wide 11-1/2" x 10-3/4" x 2" thick, black poly mounting board
  • 7-5/8" x 7-7/8" mounting bracket dimensions
  • 4 position locking height adjustment
  • Stainless mounting hardware
  • Made of 304 stainless steel
angle1.gif - 12190 Bytes angle2.gif - 14565 Bytes angle3.gif - 13232 Bytes
Specifications and selection chart:
Model
H.P. Rating
Maximum Motor Weight
Vertical Travel
71033**
7-1/2 to 25
118 lbs.
11-1/4" (29cm)
71056*
7-1/2 to 20
115 lbs.
11-1/4" (29cm)
71039
7/1/2 to 12
82 lbs
14-1/4 (36cm)
* recommender for for use with motors equipped with long shafts or electric starts
** heavy duty with reinforced welded frame and stamped stainless componenets
 
Qty Model Description Price
71033 Ourboard Motor Bracket, Stainless Steel $264.95
71039 Ourboard Motor Bracket, Stainless Steel $229.95
71056 Ourboard Motor Bracket, Stainless Steel $207.95
 



71041.gif - 8504 Bytes
Aluminum Motor Brackets
  • Retractable bracket for trolling auxiliary motors on power or sailboats
  • Transom mount locks and holds motor up or swings down for propulsion
  • Tough Alloy Anodized Aluminum, Stainless Steel springs and bolts
  • fits all style motors
  • Extra Wide 11-1/2" x 10-3/4" x 2" black poly mounting board
  • 4 position locking height adjustment
Specifications and selection chart:
Model
H.P. Rating
Maximum Motor Weight
Vertical Travel
71040*
To 8
59 lbs.
8-1/2" (22cm)
71042
7-1/2 to 20
82 lbs.
14-1/4" (36cm)
71057**
7-1/2 to 20
115 lbs
11-1/4" (29cm)
* Works for Motors with Single Attaching Clamp
** Recommended for motors with Standard shaft length
 
Qty Model Description Price
71040 Outboard Motor Bracket, Aluminum $154.95
71042 Outboard Motor Bracket, Aluminum $177.95
71057 Outboard Motor Bracket, Aluminum $171.95



71074.gif - 5885 Bytes71078.gif - 4491 Bytes
Stationary Motor Brackets
  • Fixed Height for auxiliary or trolling motor
  • 304 Stainless steel hardware
  • 1-1/2" x 8" Black poly mounting Board
  • For motors up to 15 H.P.
  • plus or minus 7-35 degree adjustment on model 71075
 
Qty Model Description Price
71074 Stainless Steel Stationary O.B.Bracket $76.95
71075 Adjustable Stainless Steel Stationary O.B. Bracket $92.95
71078 Stainless Steel Platform Bracket $92.95



71060.gif - 6979 Bytes
Canoe Outboard Motor Bracket
  • Mounts to port or starboard side of canoe
  • for motors up to 3 H.P.
  • Aluminum mount and clamps rest on lip
  • 1" adjustable plated tube

 
 
Qty Model Description Price
71060 Canoe Outboard Motor Bracket $87.95



Accessories
 
71053.gif - 12198 Bytes
Adapter Plate for Aluminum Motor Brackets
  • Enables quick removal of braclets from transom
  • Anodized aluminum plate mounts to transom
  • bracket slides in and locks
  • can also be used for storage
  • Fits 71040, 71042 and 71057

 
 
Qty Model Description Price
71053 Adapter Plate for Bracket $58.95
 
71036.gif - 4763 Bytes71036.jpg - 3479 Bytes
Outboard Motor Tilter
  • leverage tool for use with manual lift motors
  • Tilts motor back easier with less strain
  • Adjustable to fit shroud of outboard with hand holds
  • Compact for storage
  • all contact point protected

 
 
Qty Model Description Price
71036 Motor Tilter $58.95
 
 
Replacement Mounting Pads
99049 Poly Mounting Board for 71091, 71092 $60.95
99057 Poly Mounting Board, Wide for outboard Motor Brackets $34.95
71030 Flexible Motor Safety Cable $25.95


Please Note:
With all the recent cases of on-line credit card and Identity theft,
we feel obliged to inform our customers that neither
C.G. Edwards Co Inc. or Boxell's Chandlery,
under any circumstance sell or divulge any personal information about our customers,
nor do we in any way store confidential information on our server.
Please be assured that we will continue to do everything within our power to keep any
information submitted by our customers as secure as we possibly can.

Please select the products and/or enter the number of units required. On JavaScript-enabled browsers the display table will be automatically updated. Such display is for information only and is not essential for the operation. You can select any number of items prior to adding to the shopping cart. It is not necessary to add each item to the cart as they are selected. However, if the products are in the form of a simple or dropdown list, and JavaScript is NOT enabled, then you must add each item to the cart individually.

Current Selection
The following information is generated automatically for display only. Tax and delivery may be changed.
Total value ($) Choose Tax rate(%)
 
Sub total ($)
 

Contact C.G. Edwards
Contact C.G. Edwards

garbutton.gif - 3038 Bytes
Return to Garelick Index

hpbutton.jpg - 1591 Bytes
Return to C.G. Edwards Homepage


This page updated September 26, 2011

All Images and logo's on this website are copyrighted and may not be reproduced without permission